Graphite - Sales and service program1. Flake graphite - carbon content: 80 - 99.95 %
1.1 Flakes
Flake sizes of > 106 ΅m (150 mesh) up to > 600 ΅m (28 mesh)
1.2 Powders
Particle sizes of < 150 ΅m (100 mesh) up to < 45 ΅m (325 mesh)
1.3 Micronised powders
down to 50 % min. finer than 2 ΅m (traditionally measured)
1.4 Spherical or "potato shape" graphite
with high bulk density and high purity
1.5 Extremely large flakes
for the production of "graphene"
2. Expandable graphite - carbon content: 85 - 99.9 %
2.1 for PU-foams
with neutral and slightly alkaline pH value, e.g. for passenger seats
2.2 for Latex-foam
this is special expandable graphite
2.3 for Latex-spray and lacquers
with small flakes and large expansion volume
2.4 for carpets, carpets underlay, and roofing
strong and at a good price
2.5 for windows, doors, openings, between fire walls
and in ventilation systems
2.6 for the electrical and steel industry
expands at low or hig temperatures
2.7 with extremely low sulphur content
and large expansion volume at low temperatures
3. Graphite foil and graphite plates - carbon content: 98 - 99.5 %
3.1 Graphite foil
thickness of 0.127 to 3 mm, coiled on rolls and as sheets
3.2 Graphite sheets reinforced with metal sheets
tanged or glued, from 0.2 to 3 mm,
3.3 Graphite seals and gaskets
produced according to customer's requirements
3.4 Graphite tapes
as rolls or bearings produced according to customer's requirements
3.5 Expandable graphite foil
without and wit textile lining, adhesive or plastic lining
4. Packing made of graphite foil - carbon contentsof 90 to 99%
4.1 Packing
from 4 to 50 mm, with or without metal wires
4.2 Pressed as rings
with and without cut
4.3 Yarns for the production of packing
produced according to customer' requirements
5. Suspensions in water, oil, etc. - carbon contents up to 99.9%
5.1 Finest and purest flake graphite and artificial graphite
in stable suspensions
5.2 Finest and purest flake graphite and artificial graphite
in stable paste
5.3 Combinations with other types of graphite and liquids are possible
6. Amorphous graphite (cryptocrystalline graphite) - carbon contents of 65 to > 90%
6.1 amorphous graphite powder
fineness < 100 mesh (150 ΅m) to 325 mesh (45 ΅m)
6.2 amorphous graphite grains and lumps
produced according to customer's requirements
6.3 amorphous graphite briquettes
for carbon raisingin steel works
6.4 micronised graphite powders
down to particle sizes of about 50% < 2 ΅m (traditional)
7. Artificial graphite (made f petrol coke) - carbon contents 98 to 99.9 %
7.1 Electrodes
for several applications in different quality
7.2 Blockes and profiles
there are many special qualities for many applications
7.3 Graphite tiles and linings
for plants as protection against chemical attack
7.4 Special piece parts
made of artificial graphite, for special applications
7.5 Grains made of clean scrap of electrodes for steel works
for carbon raising of steel
7.6 Powders made of clean scrap of electrodes for steel works
for brake lings, plastics, ...
7.7 Micronised artificial graphite powders
for several applications
8. Special types of carbon
8.1 Special types of coke, Carbon black coal
for special applications
8.2 Graphite fibers and felts
9. Graphite lab service for graphite producers, dealers, and consumers
Examination and evaluation of graphite grades and graphite ores
Improvement of graphite processing:
- Beneficiation
many flotation plants destroy the flakes
- High purification by flotation
to achieve high carbon contetnts by flotation
- High purification of graphite by various chemical methods
- Improvements for drying, screening, packing, and dedusting
- Micronising of graphite
dry and in liquids
- Expandable graphite
to find the best suitable type for special applications
Development of new technology for the production and handling of graphite
Improvement of the working and environmental conditions, when processing graphite
10. Consulting service for graphite producers, dealers, and consumers
Graphite producers
Prospecting, lab work, calculating and evaluation of graphite ore bodies
Design and lay out of graphite mines
To find out best possible applications for special types of graphite
Marketing studies for graphite with special properties
Feasibility studies, project planning, treatment and implementation
Special projects for the improvement of operating plants
Special projects for high purification and micronising of graphite
Special projects for expandable graphite and graphite foil
To prevent damage of flakes, to achieve hig utilisation of capacity
To achieve little wear of equipment, loss of graphite, and low cost of operation
Elaboration of tender specifications, bid evaluation, inspections, and start up
Effective control systems for production, cost, and quality
Effective organisation and training, motivation and cost saving programs
Graphite dealers and graphite consumers
Lab work and evaluation of graphite types and grades
Research for suitable applications for special types of graphite
Research for suitable types of graphite for special applications
Prices and samples
We do not publish catalogues and price lists. The great number of different graphite products in different quantities and conditions of shipment would bust the volume of a catalogue and would make it difficult to handle.
We decided to prepare individual offers for our clients for each single inquiry. They fit to our customers requirements and are easy to understand. For the preparation of our offers we ask for the following information: - Type of graphite, requested specifications, dimensions, tolerances, and whatever is important for our customers. It would help us to find the best suitable grade if you would indicate the application of the inquired graphite
- Quantity per shipment, packing, delivery time, and delivery address
We are offering a sample service to our customers for testing of our products at a standard cost contribution and the transport fee for the parcel.
Please let us know which samples you would like to test.
Sample request via email
|
